5 Reasons to Hire a Licensed Plumber in Sydney

Plumbing is any system that conveys fluids for a broad array of applications. It typically includes tubing, valves, plumbing fixtures, tanks, and other equipment. While commonly associated with potable water systems and wastewater systems, plumbing is also used in heating and cooling (HVAC), fuel gas systems, and other industrial uses.

The word “plumbing” comes from the Latin word *plumbum*, meaning lead. That’s right — our pipe-loving ancestors were already using lead pipes when most people were still figuring out fire.

Plumbing has a long and leaky history. Civilizations like Mesopotamia, the Indus Valley, and Egypt all developed early plumbing methods. In fact, they were already using clay sewer pipes as far back as 4000 BCE. The Indus Valley even had standardized earthenware piping with asphalt seals — that’s some serious engineering.

By 2400 BCE, Egyptians were already laying down copper pipes. And in Rome, the plumbing game peaked with lead aqueducts, intricate tile drainage, and a little light water theft prevention thanks to pipe inscriptions.

Of course, things took a bit of a downturn after Rome’s fall. For about 1,000 years, sanitation meant tossing waste out the window and hoping for rain. It wasn’t until the 1800s that densely populated cities got their act together, creating separate sewer and water systems to fight disease.

Today, plumbing serves a wide variety of functions. The main types include:
- Potable water supply (cold and hot)
- Plumbing drainage and venting
- Sewage and septic systems, with optional greywater recovery
- Fuel gas distribution
- Rainwater and stormwater management
- Hydronic heating and cooling systems

Water pipes themselves have evolved, too. While Romans used lead, today we prefer copper, PEX, and PVC (with fewer health hazards). Fun fact: wooden water pipes were used in places like London and Philadelphia up until the 1800s — they sealed them with hot animal fat. Tasty.

From lead to copper, and wood to plastic, plumbing continues to evolve — but the goal remains the same: keep clean water flowing in and the nasty stuff flowing out. Just maybe with fewer explosions.

A plumber wrench, also known as a Swedish pattern wrench, is a type of plier designed to secure and twist plumbing pipes with enhanced force. 

Unlike traditional wrenches, the plumber wrench has an adjustable jaw mechanism, allowing for quick size changes without the need for a lock nut. It’s ideal for working on plumbing fittings, and even flat engagement points. But don’t go too hard — if used improperly, it can damage delicate piping.

The invention of this tool dates back to 1888, when Swedish inventor Johan Petter Johansson created the plumber wrench. He also revolutionized the adjustable wrench design with a patent in 1891, making him a key figure in hand tool history.

Nowadays, the plumber wrench is more popular in Europe than in North America, where other designs like the Stillson wrench and channel-lock pliers are more common.

Plumbers and technicians use this wrench for:
- Securing threaded pipes
- Releasing stubborn fittings
- Keeping tension on round surfaces
- Installing pipes without damaging them

Its design provides stable control with less physical effort, making it a top choice for jobs requiring precision and power.

While newer tools exist, the plumber wrench remains a reliable addition to any plumber’s toolkit. With its clever design and historic origins, it’s a true example of tool-making genius in plumbing history.

A water fixture is a removable device that connects to a plumbing system to provide and dispose of water.

=== Standard Plumbing Fixtures ===

Fixtures that supply water include:

• Basins

• Showerheads

• Bathtubs

• Bidets

• Water bubblers

• Tapware

• Connections for dishwashers

• Ice maker valves

• Channel drains

• Wall-mounted toilets

• Flush toilets

=== Drainage and Overflow ===

Each plumbing fixture typically has one or more exit points and drainage connections. Many also include:

• A flood rim

• An backup drain to redirect excess water

• A drain stopper to hold water in the basin (for sinks, tubs)

Water closets and some floor drains usually don’t have overflow protection due to their open-drain nature.

Each fixture has its own supply connection method. Standard practice includes service valves before each fixture. Supply lines are often:

• Flexible braided hoses

• Rigid tubes

• Dual water supplies

Toilets usually have a flat neoprene washer, while sinks use a conical one. Tubs and kitchen faucets may be sweated or fitted with compression joints directly to the water supply.

=== How Plumbing Fixtures Drain ===

Key parts of drainage include:

• The strainer (main exit of the basin)

• The tailpiece (connects to the trap)

• The wax ring (seals a toilet base to the flange—usually beeswax or synthetic)

Proper seating and alignment of toilets are vital to ensure sealing and prevent leakage.

=== Drain Traps ===

All fixtures are designed with traps—curved drain pipes that hold water, creating a seal that blocks sewer gases. Examples:

• Integral traps: Found in toilets, urinals

• External traps: Found under sinks and tubs

Venting is essential to avoid siphoning water out of the trap or pressurizing the sewer gases. Lack of venting can cause dangerous gas buildup.

=== Electronic Plumbing Features ===

Public restrooms increasingly use:

• Sensor toilets

• Sensor urinals

• Infrared taps

• Sensor soap dispensers

Benefits:

• Improved hygiene

• Water-saving features

• Longer lifespan

Some smart flushers adjust the volume based on traffic, avoiding unnecessary full flushes.

Drawbacks:

• Some users dislike unexpected flushing

• Kids often avoid auto-flushers

• Some parents use sticky notes to cover sensors

Installation requires both a licensed trade professionals, and troubleshooting can be harder due to the microelectronics involved.

=== Compliance Guidelines ===

Some of the widely recognized standards include:

• ASME A112.18.1 – Plumbing Supply Fittings

• ASME A112.18.2 – Plumbing Waste Fittings

Fixtures must comply with local building codes and health standards, especially those connected to both potable and non-potable water systems.

A professional plumber is a trained tradesperson who sets up and maintains systems used for drinking water, hot water, sewage, and drainage. Plumbers play a crucial role in both residential, business, and construction environments.

The word "plumber" comes from the Latin term "plumbum," meaning lead, because Roman-era plumbers often worked with lead piping. While lead is no longer used today, the name stuck around.

To become a plumber in Australia, one must complete a structured training program and earn a Certificate III in Plumbing. This often includes basic gas fitting training and allows the plumber to work under supervision on gas-related tasks. With experience, plumbers can apply for a full gas license.

Typical tasks include:
- Reading blueprints
- Laying and fixing pipes and fixtures
- Identifying plumbing issues and their causes
- Working with pipes
- Testing systems for leaks
- Adhering to building codes and safety regulations

In some countries, like Canada, plumbing standards are unified under programs like the Red Seal. In contrast, places like Colombia do not require official certification, although many plumbers train informally through family or trade schools.

In the UK and Ireland, formal qualifications and vocational exams are required. In the US, licenses and regulations vary by state, and many regions distinguish between journeyman and master plumbers.

Plumbers face a number of hazards, including electric shocks, cuts, falls, exposure to chemicals, and infectious diseases, especially when dealing with sewage. That’s why proper training and safety practices are critical.

Today’s plumbers also work with modern technologies like CCTV pipe inspections, water-saving systems, and high-pressure jetting equipment. Whether you're renovating a bathroom, fixing a leaky tap, or handling a burst pipe, a licensed plumber brings expertise, safety, and peace of mind to every job.

Pipe fittings are components used to join sections of pipe or tubing, adapt diameter, and regulate fluid movement in a variety of systems. They’re found in drinking water, agricultural, sewage, cooling, gas, petroleum, and industrial pipelines.

These fittings allow pipelines to extend farther, split flows, or change size—making complex systems possible. Valves, a type of specialized fitting, let you start or control fluid flow.

Fittings are made from materials that suit their use and connection method—common examples include:

— **Copper** (soldered joints)  
— **Brass or iron** (threaded fittings)  
— **Brass** compression fittings and adapters  
— **PVC and CPVC** for wastewater systems

They’re installed by methods like soldering, gluing, threading, compression fittings, plastic welding, and friction or push-fit joints.

Fitting types include:

— **Adapters**: connect different pipe types, manage expansion, or mismatch in diameter or thread.  
— **Elbows** (45°, 90°): change direction, and come in short-, long-, or custom-radius styles.  
— **Couplings**: join pipes of the same size, while **reducing couplings** connect different sizes.  
— **Unions**: allow easy disassembly—great for maintenance or replacements.  
— **Reducers and bushings**: shift pipe size down, either concentrically or eccentrically.  
— **Tees and crosses**: split or join multiple flow lines—tees have three, crosses have four.  
— **Caps and plugs**: seal open ends, either temporarily or permanently.  
— **Barbs**: secure flexible hoses to plumbing lines.  
— **Valves**: control flow—types include gate, ball, globe, needle, butterfly, diaphragm, or check valves.

Choosing materials and standards is important. Options include:

— **Metal**: copper, stainless or galvanized steel, cast iron, malleable iron, chrome-alloy steels  
— **Non‑metal**: PVC, CPVC, ABS, PEX, HDPE, FRP  
— **Brass/bronze** for corrosion-resistant fittings  
— All parts must align with building/plumbing codes and materials compatibility (e.g., no mixing dissimilar metals without a dielectric union).

Gaskets are used at flange joints and come as:

— **Non‑metallic ring gaskets** (ASME B16.21),  
— **Spiral‑wound** (ASME B16.20),  
— **Ring‑joint gaskets** for RTJ flanges.

Inspectors rely on standards from:

— ASME (B36, B16, B31 series), ASTM, API, AWS, AWWA, ANSI, NFPA, MSS, CGA, PCA… and others to standardize safe, reliable systems.

For residential setups, you’ll often use push-fit plastic or compression fittings. In industrial sites, you might see heavy-duty threaded or welded flanges.

Proper selection of pipe fitting type, material, and size ensures that your plumbing system is safe and long-lasting.